Corners cleanup


crm1

The rest machining operation takes the diameter of the previous tool as a parameter and generates passes where the previous tool would leave unmachined material.

Parameters

Previous tool diameter

crm2

The diameter of a spherical mill which is used for the rest material calculation.

Cut depth

crm3

The maximum cut depth for a cut

Step

The maximum step-over between passes

Strategies

Along

crm4

The passes are generated along the corners.

Across

crm7

The passes are generated across corners

Combined

crm1

For shallow areas - along passes are generated, for steep areas - across passes are generated.

Job zone

Machining surfaces

Passes are generated only where the tool contacts the machining surfaces. If the machining surfaces are missing, the toolpath is generated against the whole part.

Bottom level

A bottom level can be set for the passes

See example of operation on YouTube:

 https://youtu.be/ANKfyNN65uQ?t=136